Contaminant Transport Through Barriers

Even a liner that leaks almost no water can still let contaminants through. Transport through barriers is governed by four processes.

Advection

Contaminants carried with flowing water. Flow through saturated soil follows Darcy’s law, q = k·i, and the average linear (seepage) velocity is v = q/ne, where ne is effective porosity. Low hydraulic conductivity and low head reduce advection.

Molecular diffusion

Movement from high to low concentration, even with no flow. In clay barriers with very low conductivity, diffusion often controls contaminant migration. Fick’s first law for porous media is written

J = −n · D* · ∂c/∂z

where D* is the effective diffusion coefficient (the free-solution coefficient reduced by tortuosity). Volatile organic compounds also diffuse through intact geomembranes by partitioning into and through the polymer.

Mechanical dispersion

Spreading caused by velocity variations in pores. It is usually lumped with diffusion into a hydrodynamic dispersion coefficient. In low-flow barriers, dispersion is minor compared with diffusion.

Sorption and retardation

Many contaminants attach to soil solids. For linear, reversible sorption with distribution coefficient Kd, the retardation factor is

R = 1 + (ρd/n) · Kd

A species with R = 10 moves ten times slower than the water. Heavy metals and many organics are retarded by clays; conservative species such as chloride are not.

Putting it together

In one dimension the advection–dispersion–reaction equation is

R · ∂c/∂t = D · ∂²c/∂z² − v · ∂c/∂z − λRc

with decay constant λ. Barrier design asks how long until a contaminant breaks through a given thickness, and at what concentration. The Péclet number (vL/D) indicates whether advection or diffusion dominates.

Design implications

  • Thicker soil components buy time for diffusion and sorption.
  • Composite liners cut advection; the soil layer handles diffusion and attenuation.
  • For organic compounds, geomembrane diffusion should be checked explicitly.
  • Mass-flux comparisons, not just leakage rates, are the fair basis for comparing alternative liner designs.

Keep learning

Glossary